CTS-8.00-200760: Coolant Thru Drilling & Boring sleeve Ø 8.0mm ID-Ø20mm Shank-OAL 3.0"-M6-1.00 Scr.

Login to check Price
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000123
Bore Size
8mm
Sleeve Shank Size
20mm
OAL
3in
Set Screw
M6
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
SDK 644 592 R UHM20

SDK 644 592 R UHM20

Learn More & Buy
SDI-2060-PRF-MG: #2 Insert Spot Drill 60°, Pos. Grind w/Radial Relief,RH,.005 Point Flat,Carbide

SDI-2060-PRF-MG: #2 Insert Spot Drill 60°, Pos. Grind w/Radial Relief,RH,.005 Point Flat,Carbide

Learn More & Buy
SDR 440 342 R UHM20 HX

SDR 440 342 R UHM20 HX

Learn More & Buy
GD2-298-300-1800-H - 2.98mm (.1173") OD, 3mm Shank, 18mm Flute Length, 120 Deg Point HiCo8

GD2-298-300-1800-H - 2.98mm (.1173") OD, 3mm Shank, 18mm Flute Length, 120 Deg Point HiCo8

Learn More & Buy
TD-342-0.15:  0.15mm 2FL Carbide Drill

TD-342-0.15: 0.15mm 2FL Carbide Drill

Learn More & Buy
GD4-126-1.5-600-C - 1.26mm (.0496") OD, 1.5mm Shank, 6mm Flute Length, 120 Deg Point UHM20

GD4-126-1.5-600-C - 1.26mm (.0496") OD, 1.5mm Shank, 6mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
TD-340-0.55:  0.55mm  2FL Carbide Drill for SS

TD-340-0.55: 0.55mm 2FL Carbide Drill for SS

Learn More & Buy
SDA 4 120 14

SDA 4 120 14

Learn More & Buy
TR-8600-0088:        Micro  Reamer 0.880mm +0.003 (.0346'' + .00012'' x .275 Flt. x 1.300'' OAL)

TR-8600-0088: Micro Reamer 0.880mm +0.003 (.0346'' + .00012'' x .275 Flt. x 1.300'' OAL)

Learn More & Buy
GD5-186-200-1200-C - 1.86mm (.0732") OD, 2mm Shank, 12mm Flute Length, 120 Deg Point UHM20

GD5-186-200-1200-C - 1.86mm (.0732") OD, 2mm Shank, 12mm Flute Length, 120 Deg Point UHM20

Learn More & Buy