CTS-7.94-200760: Coolant Thru Drilling & Boring sleeve Ø .3125" ID-Ø20mm Shank-OAL 3.0"-M6-1.00 Scr.

Login Required
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000122
Bore Size
.3125in
Sleeve Shank Size
20mm
OAL
3in
Set Screw
M6
Item Returns
This item can be returned
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
SDR 644 592 R UHM20 HX

SDR 644 592 R UHM20 HX

Learn More & Buy
SXF 440 392 R UHM20 HX

SXF 440 392 R UHM20 HX

Learn More & Buy
GD4-178-2.0-720-C - 1.78mm (.0701") OD, 2mm Shank, 7.2mm Flute Length, 120 Deg Point UHM20

GD4-178-2.0-720-C - 1.78mm (.0701") OD, 2mm Shank, 7.2mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
SDA 8 120 25.40

SDA 8 120 25.40

Learn More & Buy
SDQ 866 692 R UHM20 HX

SDQ 866 692 R UHM20 HX

Learn More & Buy
GD4-181-2.0-840-C - 1.81mm (.0713") OD, 2mm Shank, 8.4mm Flute Length, 120 Deg Point UHM20

GD4-181-2.0-840-C - 1.81mm (.0713") OD, 2mm Shank, 8.4mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
TD-343-6-1.75:  1.75mm  2FL Carbide Drill for SS

TD-343-6-1.75: 1.75mm 2FL Carbide Drill for SS

Learn More & Buy
SDI-2090-PRF-MG:  #2 Insert Spot Drill 90°, Pos. Grind, RH .005 Point Flat,  Carbide

SDI-2090-PRF-MG: #2 Insert Spot Drill 90°, Pos. Grind, RH .005 Point Flat, Carbide

Learn More & Buy
TD-342-1.01:  1.01mm 2FL Carbide Drill

TD-342-1.01: 1.01mm 2FL Carbide Drill

Learn More & Buy
TD-337-2-3:  3mm  2FL Carbide 120Deg RH NC-Center Drill

TD-337-2-3: 3mm 2FL Carbide 120Deg RH NC-Center Drill

Learn More & Buy