CTS-7.94-190760: Coolant Thru Drilling & Boring sleeve Ø .3125" ID-Ø.750" Shank-OAL 3.0"-M6-1.00 Scr

Login Required
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000114
Bore Size
.3125in
Sleeve Shank Size
.75in
OAL
3in
Set Screw
M6
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
SXI 440 092 R UHM20

SXI 440 092 R UHM20

Learn More & Buy
TD-343-8-1.79:  1.79mm  2FL Carbide Drill for SS

TD-343-8-1.79: 1.79mm 2FL Carbide Drill for SS

Learn More & Buy
TD-337-2-1:  1mm  2FL Carbide 120Deg RH NC-Center Drill

TD-337-2-1: 1mm 2FL Carbide 120Deg RH NC-Center Drill

Learn More & Buy
SDS 448 292 R UHM20 HX

SDS 448 292 R UHM20 HX

Learn More & Buy
SDH 656 592 R UHM20

SDH 656 592 R UHM20

Learn More & Buy
GD3-190-2.0-650-C - 1.90mm (.0748") OD, 2mm Shank, 6.5mm Flute Length, 120 Deg Point UHM20

GD3-190-2.0-650-C - 1.90mm (.0748") OD, 2mm Shank, 6.5mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
SDI-2060-PRF-T15-TLN:#2 Insert Spot Drill 60°,Pos.Grind w/Radial Relief,RH,.005 Point Flat, T15

SDI-2060-PRF-T15-TLN:#2 Insert Spot Drill 60°,Pos.Grind w/Radial Relief,RH,.005 Point Flat, T15

Learn More & Buy
GD1-145-1.5-270-H - 1.45mm (.0571") OD, 1.5mm Shank, 2.7mm Flute Length, 120 Deg Point HiCo8

GD1-145-1.5-270-H - 1.45mm (.0571") OD, 1.5mm Shank, 2.7mm Flute Length, 120 Deg Point HiCo8

Learn More & Buy
GD4-032-1.0-160-C - .32mm (.0126") OD, 1mm Shank, 1.6mm Flute Length, 120 Deg Point UHM20

GD4-032-1.0-160-C - .32mm (.0126") OD, 1mm Shank, 1.6mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
TD-342-0.39:  0.39mm 2FL Carbide Drill

TD-342-0.39: 0.39mm 2FL Carbide Drill

Learn More & Buy