CTS-6.35-254760: Coolant Thru Drilling & Boring sleeve Ø .250" ID-Ø1.00" Shank-OAL 3.0"-M6-1.00 Scr.

Login Required
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000137
Bore Size
.25in
Sleeve Shank Size
1in
OAL
3in
Set Screw
M6
Item Returns
This item can be returned
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
TD-370-1.65:  1.65mm Expert Carb Drill for SS/Inox

TD-370-1.65: 1.65mm Expert Carb Drill for SS/Inox

Learn More & Buy
TD-342-0.43:  0.43mm 2FL Carbide Drill

TD-342-0.43: 0.43mm 2FL Carbide Drill

Learn More & Buy
TD-343-6-0.89:  0.89mm  2FL Carbide Drill for SS

TD-343-6-0.89: 0.89mm 2FL Carbide Drill for SS

Learn More & Buy
SXJ 440 092 R UHM20 HX

SXJ 440 092 R UHM20 HX

Learn More & Buy
SDI 644 592 R UHM20 HX

SDI 644 592 R UHM20 HX

Learn More & Buy
SDI-3082-NRM-TIN:  #3 Insert Spot Drill 82°, Neg. Grind, RH, .015 Point Flat,  Carbide w/ Tin

SDI-3082-NRM-TIN: #3 Insert Spot Drill 82°, Neg. Grind, RH, .015 Point Flat, Carbide w/ Tin

Learn More & Buy
RBT-2110-01.72H:              Hex  .0675-.0679  L2=.102   Shk Ø8x28  Gr HiCo8   No Vent   Pos Fa

RBT-2110-01.72H: Hex .0675-.0679 L2=.102 Shk Ø8x28 Gr HiCo8 No Vent Pos Fa

Learn More & Buy
SDK 435 142 R UHM20

SDK 435 142 R UHM20

Learn More & Buy
TD-353-1-2.8:  2.8mm  3FL 140 Deg Point

TD-353-1-2.8: 2.8mm 3FL 140 Deg Point

Learn More & Buy
TD-340-0.76:  0.76mm  2FL Carbide Drill for SS

TD-340-0.76: 0.76mm 2FL Carbide Drill for SS

Learn More & Buy