CTS-6.35-220760: Coolant Thru Drilling & Boring sleeve Ø .250" ID-Ø22mm Shank-OAL 3.0"-M6-1.00 Scr.

Login to check Price
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000129
Bore Size
.25in
Sleeve Shank Size
22mm
OAL
3in
Set Screw
M6
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
GD4-143-1.5-670-C - 1.43mm (.0563") OD, 1.5mm Shank, 6.7mm Flute Length, 120 Deg Point UHM20

GD4-143-1.5-670-C - 1.43mm (.0563") OD, 1.5mm Shank, 6.7mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
TD-342-1.37:  1.37mm 2FL Carbide Drill

TD-342-1.37: 1.37mm 2FL Carbide Drill

Learn More & Buy
RBT-6150-03H:                Hex  .1205-.1212  L2=.255   Shk Ø12x55  Gr HiCo8   No Vent   Pos Fa

RBT-6150-03H: Hex .1205-.1212 L2=.255 Shk Ø12x55 Gr HiCo8 No Vent Pos Fa

Learn More & Buy
SDR 435 092 R UHM20

SDR 435 092 R UHM20

Learn More & Buy
TD-348-0.5:  0.5mm  2FL Carbide Drill

TD-348-0.5: 0.5mm 2FL Carbide Drill

Learn More & Buy
TD-352-1-1.3:  1.3mm  2FL 118 Deg

TD-352-1-1.3: 1.3mm 2FL 118 Deg

Learn More & Buy
TD-353-1-6:  6mm  3FL 140 Deg Point

TD-353-1-6: 6mm 3FL 140 Deg Point

Learn More & Buy
TD-353-0.55:  0.55mm  3FL 140 Deg Point, Carbide Drill, 7mm LOC, 3mm Shank, 38mm OAL

TD-353-0.55: 0.55mm 3FL 140 Deg Point, Carbide Drill, 7mm LOC, 3mm Shank, 38mm OAL

Learn More & Buy
GD2-011-1.0-070-H - .11mm (.0043") OD, 1mm Shank, .7mm Flute Length, 120 Deg Point HiCo8

GD2-011-1.0-070-H - .11mm (.0043") OD, 1mm Shank, .7mm Flute Length, 120 Deg Point HiCo8

Learn More & Buy
GD6-140-3.0-125-C - 1.40mm (.0551") OD, 3mm Shank, 10mm Flute Length, 140 Deg Point UHM20

GD6-140-3.0-125-C - 1.40mm (.0551") OD, 3mm Shank, 10mm Flute Length, 140 Deg Point UHM20

Learn More & Buy