CTS-6.00-158760: Coolant Thru Drilling & Boring sleeve Ø 6.0mm ID-Ø.625" Shank-OAL 3.0"-M6-1.00 Scr.

Login to check Price
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000104
Bore Size
6mm
Sleeve Shank Size
.625in
OAL
3in
Set Screw
M6
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
TD-348-7.7:  7.7mm  2FL Carbide Drill

TD-348-7.7: 7.7mm 2FL Carbide Drill

Learn More & Buy
GD4-210-3.0-1200-C - 2.10mm (.0827") OD, 3mm Shank, 12mm Flute Length, 120 Deg Point UHM20

GD4-210-3.0-1200-C - 2.10mm (.0827") OD, 3mm Shank, 12mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
TD-370-1.18:  1.18mm Expert Carb Drill for SS/Inox

TD-370-1.18: 1.18mm Expert Carb Drill for SS/Inox

Learn More & Buy
TD-342-1.04:  1.04mm 2FL Carbide Drill

TD-342-1.04: 1.04mm 2FL Carbide Drill

Learn More & Buy
TD-343-6-0.88:  0.88mm  2FL Carbide Drill for SS

TD-343-6-0.88: 0.88mm 2FL Carbide Drill for SS

Learn More & Buy
TD-370-1.32:  1.32mm Expert Carb Drill for SS/Inox

TD-370-1.32: 1.32mm Expert Carb Drill for SS/Inox

Learn More & Buy
SXG 435 242 R UHM20 HX

SXG 435 242 R UHM20 HX

Learn More & Buy
TD-343-8-0.81:  0.81mm  2FL Carbide Drill for SS

TD-343-8-0.81: 0.81mm 2FL Carbide Drill for SS

Learn More & Buy
TD-343-12-4:  4mm  2FL Carbide Drill for SS

TD-343-12-4: 4mm 2FL Carbide Drill for SS

Learn More & Buy
TD-337-3-20:  20mm  2FL Carbide 60Deg NC-Center Drill

TD-337-3-20: 20mm 2FL Carbide 60Deg NC-Center Drill

Learn More & Buy