CTS-3.18-220760: Coolant Thru Drilling & Boring sleeve Ø .125" ID-Ø22mm Shank-OAL 3.0"-M4-0.70 Scr.

Login to check Price
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000125
Bore Size
.125in
Sleeve Shank Size
22mm
OAL
3in
Set Screw
M4
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
TR-8600-0173:        Micro  Reamer 1.730mm +0.003 (.0681" + .00012" x .433 Flt x 1.970" OAL)

TR-8600-0173: Micro Reamer 1.730mm +0.003 (.0681" + .00012" x .433 Flt x 1.970" OAL)

Learn More & Buy
TD-342-1.06:  1.06mm 2FL Carbide Drill

TD-342-1.06: 1.06mm 2FL Carbide Drill

Learn More & Buy
TD-353-0-1.47:  1.47mm  3FL 140 Deg Point

TD-353-0-1.47: 1.47mm 3FL 140 Deg Point

Learn More & Buy
GD2-161-2.0-1000-H - 1.61mm (.0634") OD, 2mm Shank, 10mm Flute Length, 120 Deg Point HiCo8

GD2-161-2.0-1000-H - 1.61mm (.0634") OD, 2mm Shank, 10mm Flute Length, 120 Deg Point HiCo8

Learn More & Buy
GD5-118-1.5-1000-C - 1.18mm (.0465") OD, 1.5mm Shank, 10mm Flute Length, 120 Deg Point UHM20

GD5-118-1.5-1000-C - 1.18mm (.0465") OD, 1.5mm Shank, 10mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
SDG 866 692 R UHM20

SDG 866 692 R UHM20

Learn More & Buy
TD-343-12-1.77:  1.77mm  2FL Carbide Drill for SS

TD-343-12-1.77: 1.77mm 2FL Carbide Drill for SS

Learn More & Buy
SDO 644 542 R UHM20 HX

SDO 644 542 R UHM20 HX

Learn More & Buy
GD2-224-2.5-1400-H - 2.24mm (.0882") OD, 2.5mm Shank, 14mm Flute Length, 120 Deg Point HiCo8

GD2-224-2.5-1400-H - 2.24mm (.0882") OD, 2.5mm Shank, 14mm Flute Length, 120 Deg Point HiCo8

Learn More & Buy
SDI-3060-PRM-Altin:  #3 Insert Spot Drill 60°, Pos. Grind, RH, .015 Point Flat,  Carbide w/Altin

SDI-3060-PRM-Altin: #3 Insert Spot Drill 60°, Pos. Grind, RH, .015 Point Flat, Carbide w/Altin

Learn More & Buy