CTS-3.18-158760: Coolant Thru Drilling & Boring sleeve Ø .125" ID-Ø.625" Shank-OAL 3.0"-M4-0.70 Scr.

Login to check Price
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000101
Bore Size
.125in
Sleeve Shank Size
.625in
OAL
3in
Set Screw
M4
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
GD2-123-1.5-750-H - 1.23mm (.0484") OD, 1.5mm Shank, 7.5mm Flute Length, 120 Deg Point HiCo8

GD2-123-1.5-750-H - 1.23mm (.0484") OD, 1.5mm Shank, 7.5mm Flute Length, 120 Deg Point HiCo8

Learn More & Buy
TD-337-2-1.45:  1.45mm  2FL Carbide 120Deg RH NC-Center Drill

TD-337-2-1.45: 1.45mm 2FL Carbide 120Deg RH NC-Center Drill

Learn More & Buy
SDO 668 542 R UHM20

SDO 668 542 R UHM20

Learn More & Buy
TD-352-1.25:  1.25mm  2FL 118 Deg Point Carbide Drill for SS

TD-352-1.25: 1.25mm 2FL 118 Deg Point Carbide Drill for SS

Learn More & Buy
TD-343-12-1.68:  1.68mm  2FL Carbide Drill for SS

TD-343-12-1.68: 1.68mm 2FL Carbide Drill for SS

Learn More & Buy
TD-348-1.75:  1.75mm  2FL Carbide Drill

TD-348-1.75: 1.75mm 2FL Carbide Drill

Learn More & Buy
SDI-3090-PLM-TIN:  #3 Insert Spot Drill 90°, Pos. Grind, LH, .015 Point Flat,  Carbide w/ Tin Coat

SDI-3090-PLM-TIN: #3 Insert Spot Drill 90°, Pos. Grind, LH, .015 Point Flat, Carbide w/ Tin Coat

Learn More & Buy
SDG 440 392 R UHM20

SDG 440 392 R UHM20

Learn More & Buy
TD-348-0.5:  0.5mm  2FL Carbide Drill

TD-348-0.5: 0.5mm 2FL Carbide Drill

Learn More & Buy
TD-340-1G-1.79:  1.79mm  2FL Carbide Drill for BR, 118 Deg Point, 12mm LOC, 2mm Shank, 38mm OAL

TD-340-1G-1.79: 1.79mm 2FL Carbide Drill for BR, 118 Deg Point, 12mm LOC, 2mm Shank, 38mm OAL

Learn More & Buy