CTS-3.00-220760: Coolant Thru Drilling & Boring sleeve Ø 3.0mm ID-Ø22mm Shank-OAL 3.0"-M4-0.70 Scr.

Login Required
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
1027-000124
Bore Size
3mm
Sleeve Shank Size
22mm
OAL
3in
Set Screw
M4
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
TD-337-0.75:  0.75mm  2FL Carbide 90Deg RH NC-Center Drill

TD-337-0.75: 0.75mm 2FL Carbide 90Deg RH NC-Center Drill

Learn More & Buy
TD-343-12-0.82:  0.82mm  2FL Carbide Drill for SS

TD-343-12-0.82: 0.82mm 2FL Carbide Drill for SS

Learn More & Buy
SDQ 644 542 R UHM20 HX

SDQ 644 542 R UHM20 HX

Learn More & Buy
RBH-6191-500:          Adj Rotary Broach Holder, Ø12mm Tool Bore, Shank Ø50mm x 68L with Flat

RBH-6191-500: Adj Rotary Broach Holder, Ø12mm Tool Bore, Shank Ø50mm x 68L with Flat

Learn More & Buy
GD4-259-3.0-1400-C - 2.59mm (.1020") OD, 3mm Shank, 14mm Flute Length, 120 Deg Point UHM20

GD4-259-3.0-1400-C - 2.59mm (.1020") OD, 3mm Shank, 14mm Flute Length, 120 Deg Point UHM20

Learn More & Buy
TD-353-1-4.1:  4.1mm  3FL 140 Deg Point

TD-353-1-4.1: 4.1mm 3FL 140 Deg Point

Learn More & Buy
TR-8600-0151:        Micro  Reamer 1.510mm +0.003 (.0594'' + .00012'' x .393 Flt. x 1.580'' OAL)

TR-8600-0151: Micro Reamer 1.510mm +0.003 (.0594'' + .00012'' x .393 Flt. x 1.580'' OAL)

Learn More & Buy
SDI 440 142 R UHM20 HX

SDI 440 142 R UHM20 HX

Learn More & Buy
TD-353-0-1.02:  1.02mm  3FL 140 Deg Point

TD-353-0-1.02: 1.02mm 3FL 140 Deg Point

Learn More & Buy
TD-343-6-1.7:  1.7mm  2FL Carbide Drill for SS

TD-343-6-1.7: 1.7mm 2FL Carbide Drill for SS

Learn More & Buy