CTS-3.18-190760: Coolant Thru Drill & Bore sleeve Ø .125" ID-Ø.750" Shank-OAL 3.0"-M4-0.70 Scr.

Login to check Price
0
Call for availability or request a quote now.
GSI Part
1027-000109
Bore Size
.125in
Sleeve Shank Size
.75in
OAL
3in
Set Screw
M4
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
RBT-2110-01.98H-Ti: Hex  .0793-.0797  L2=.120   Shk Ø8x28  Gr HiCo8   No Vent   For Ti

RBT-2110-01.98H-Ti: Hex .0793-.0797 L2=.120 Shk Ø8x28 Gr HiCo8 No Vent For Ti

Learn More & Buy
TD-353-1.05: 1.05mm  3FL 140 Deg Point

TD-353-1.05: 1.05mm 3FL 140 Deg Point

Learn More & Buy
TD-353-0-0.89: 0.89mm  3FL 140 Deg Point

TD-353-0-0.89: 0.89mm 3FL 140 Deg Point

Learn More & Buy
TD-352-4.7: 4.7mm  2FL 118 Deg Point Carbide Drill for SS

TD-352-4.7: 4.7mm 2FL 118 Deg Point Carbide Drill for SS

Learn More & Buy
SXG 448 292 R UHM20

SXG 448 292 R UHM20

Learn More & Buy
SDI-2082-PRM-TLN: #2 Insert Spot Drill 82°,Std. Geometry,RH .015'' Point Flat,w/Tialn coating

SDI-2082-PRM-TLN: #2 Insert Spot Drill 82°,Std. Geometry,RH .015'' Point Flat,w/Tialn coating

Learn More & Buy
SDH 644 442 R UHM20 HX

SDH 644 442 R UHM20 HX

Learn More & Buy
SDI-2090-PRF-ALTN: #2 Insert Spot Drill 90°, Pos. Grind, RH .005 Point Flat,  Carbide w/ Altn

SDI-2090-PRF-ALTN: #2 Insert Spot Drill 90°, Pos. Grind, RH .005 Point Flat, Carbide w/ Altn

Learn More & Buy
SDF 435 042 R UHM20 HX

SDF 435 042 R UHM20 HX

Learn More & Buy
SDG 448 392 R UHM20

SDG 448 392 R UHM20

Learn More & Buy