CTS-3.00-158760: Coolant Thru Drill & Bore sleeve Ø 3.0mm ID-Ø.625" Shank-OAL 3.0"-M4-0.70 Scr.

Login to check Price
0
Call for availability or request a quote now.
GSI Part
1027-000100
Bore Size
3mm
Sleeve Shank Size
.625in
OAL
3in
Set Screw
M4
"

GenSwiss® coolant-thru drill and boring sleeves are a new product designed and manufactured by GenSwiss®.  GenSwiss® drill and boring sleeves feature precision ground inch and metric shanks and are a robust method for holding drills and boring bars to tight tolerances.  Each GenSwiss® sleeve features coolant-thru holes, enabling coolant delivery to your coolant-thru drills or boring bars. The absence of an ER collet means each sleeve is sized to the specific tool shank intended for use and therefore removes any errors that can occur with standard ER collet based holders.

Coolant-thru drill and boring sleeves also streamline the number of components needed for tool holding, removing the seals required for coolant-thru ER collets.  Each coolant-thru sleeve is designed with a rear coolant input and mates with a 1/8-28 BSPP coolant fitting. Sleeves are manufactured in several inch and metric shank sizes; 5/8in, 3/4in, 1in, 20mm, and 22mm.  Nominal tool bore sizes range from 3mm to 8mm, however, drill sleeves can be manufactured to custom order.  Two set screws are present along the flats on each sleeve shank, providing a simple yet quick way to secure the tools into place.

 

"
Related Products
TD-353-1-7.8: 7.8mm  3FL 140 Deg Point

TD-353-1-7.8: 7.8mm 3FL 140 Deg Point

Learn More & Buy
SDS 440 142 R UHM20 HX

SDS 440 142 R UHM20 HX

Learn More & Buy
TD-353-1-4.7: 4.7mm  3FL 140 Deg Point

TD-353-1-4.7: 4.7mm 3FL 140 Deg Point

Learn More & Buy
GD2-030-1.0-220-H: .30mm (.0118") OD, 1mm Shank, 2.2mm Flute Length, 120 Deg Point HiCo8

GD2-030-1.0-220-H: .30mm (.0118") OD, 1mm Shank, 2.2mm Flute Length, 120 Deg Point HiCo8

Learn More & Buy
TD-340-1G-0.36: 0.36mm  2FL Carbide Drill for BR, 118 Deg Point, 1.5mm LOC, 1mm Shank, 30mm OAL

TD-340-1G-0.36: 0.36mm 2FL Carbide Drill for BR, 118 Deg Point, 1.5mm LOC, 1mm Shank, 30mm OAL

Learn More & Buy
SXP 882  692 R UHM20

SXP 882 692 R UHM20

Learn More & Buy
TD-353-1-7.6: 7.6mm  3FL 140 Deg Point

TD-353-1-7.6: 7.6mm 3FL 140 Deg Point

Learn More & Buy
TD-340-1-0.48: 0.48mm  2FL Carbide Drill for BA

TD-340-1-0.48: 0.48mm 2FL Carbide Drill for BA

Learn More & Buy
SDI 440 292 R UHM20 HX

SDI 440 292 R UHM20 HX

Learn More & Buy
TD-343-6-1.1: 1.1mm  2FL Carbide Drill for SS

TD-343-6-1.1: 1.1mm 2FL Carbide Drill for SS

Learn More & Buy